Post by Brilenus on Jan 21, 2008 13:21:14 GMT -5
This is one of my old shield designs, thus it may be useful to people looking for new types of shields.
To begin with, you are going to need a VERY large amount of energy for this to work. If you cannot make an orb of energy in under a second, I doubt that this shield will work very well at all for you.
The way this works is that you are going to create a "safe" area around yourself using a heat-resistant shield. About six feet away from that will be the outer containment shield. Once you have both of those, you begin moving energy in between them until it becomes too dense to add more.
Once you reach that state, you will have to cause the energy to enter a near-plasma state, then add even more energy. As you do this, continue to raise the temperature of the energy within.
If you can maintain the integrity of the inner containment sphere, you will be fine when attacked, but any attack that breaks the outer containment sphere will be vaporized by a plume of super-heated energy spewing out where it hit.
Since most people tend to attack you directly, this will typically also spew the same energy on them, with can be quite painful.
However, using this shield has a drawback - you need to be able to maintain both containment shields at all times, and repair the outer one every time it is breached, even if you are asleep. This means that you need to have a very powerful form of auto-repair built into the shield. Additionally, the energy inside the two containment spheres needs to be constantly heated and have even more energy added into it.
To begin with, you are going to need a VERY large amount of energy for this to work. If you cannot make an orb of energy in under a second, I doubt that this shield will work very well at all for you.
The way this works is that you are going to create a "safe" area around yourself using a heat-resistant shield. About six feet away from that will be the outer containment shield. Once you have both of those, you begin moving energy in between them until it becomes too dense to add more.
Once you reach that state, you will have to cause the energy to enter a near-plasma state, then add even more energy. As you do this, continue to raise the temperature of the energy within.
If you can maintain the integrity of the inner containment sphere, you will be fine when attacked, but any attack that breaks the outer containment sphere will be vaporized by a plume of super-heated energy spewing out where it hit.
Since most people tend to attack you directly, this will typically also spew the same energy on them, with can be quite painful.
However, using this shield has a drawback - you need to be able to maintain both containment shields at all times, and repair the outer one every time it is breached, even if you are asleep. This means that you need to have a very powerful form of auto-repair built into the shield. Additionally, the energy inside the two containment spheres needs to be constantly heated and have even more energy added into it.
me off.I'm trying to keep it running even when the wind is blowing hard so I can stay warm. 
.This is what I did I applied my "aerokinesis" abilities to a shield construct to move cold winds"air or blowing" away and then I made the second shield "Bril shield" and I could like actually feel the warmth radiating from of the shield and so did a couple people who came in couple feet's near me,but I say it could need some more work on because like I needed more energy to keep the wind from coming in and adding more energy to the Incineration shield.